Electro Permanent LIFTING Magnets
Lifting of single steel Sheets in various lengths with min. Thickness of 5 mm
Lifting long Steel Sheets is a difficult and time-consuming operation.
In addition, thin Steel Sheets are very flexible, which makes moving very dangerous.
The HM2 electro permanent magnet beams have been specially developed for safe lifting and moving of Steel Sheets in different lengths.
The electrically driven telescopic system makes it possible to use this traverse in limited spaces.
The welded Beam of structural steel is equipped with a number of electro permanent magnet modules, which are elastically suspended, for a perfect adaptation on the Steel Sheet.
The electronic control unit has a selector switch with which several magnetic modules can be activated or deactivated according to the shape of the Steel Sheet.
Lifting of only one Steel Sheet is guaranteed by the “PICK-UP” cycle.
Control via the integrated digital push Buttons or with the standard supplied Radio remote Control.
ELECTRO PERMANENT MAGNETIC TECHNOLOGY
The electric current is only used to invert the magnetic field, while the effective force is generated by permanent magnets. In the event of a power failure, the magnetic force remains permanently present = 100% safe
PICK-UP CYCLE
Lifting is done in 2 phases, whereby the workpiece is first lifted at a lower preset force, immediately followed by FULLMAG (100% of the total force)
SPC-SYSTEM (SYSTEM PERFORMANCE CHECK)
The electronic system continuously monitors the proper functioning of the magnet. Any abnormal situation is reported immediately and indicated by an error code on the help screen. In this way, errors can be immediately analysed and resolved.
SAFETY FACTOR 3:1
To lift safely, a possible air gap between the contact surface of the magnet, and the steel to be lifted, must be considered. That is why all our magnets are designed with a minimum safety factor of 3: 1 measured at an air gap of 0.4 mm.
2 BUTTON OPERATION
To start the demagnetization cycle, 2 buttons (SAFE + DEMAG) must be pressed consecutively on the remote control.
LAMP BLOCK
The status of the magnet is visually indicated by a clear LED lamp block. The load may only be moved when the green lamp lights up continuously!
LANDING DETECTION
An inductive proximity switch and associated cam, mounted on the harp shackle of the hoisting chain, prevents accidental demagnetizing in the air.
RADIO REMOTE CONTROL
The magnet is operated from a safe distance. The operator should not come in the immediate vicinity of the load.
INSTRUCTION PANEL
With clear safety instructions for the user regarding:
– Maximum weight of the load in function of material thickness
– Maximum wing in function of the deflection of the material.
Click on the Model to view the related Model
| Model | SWL (kg) | Min. Thickness (mm) | Width min - max (mm) | Length min - max (mm) | Qty EPM Modules | Weight (kg) |
|---|---|---|---|---|---|---|
| HM2-12-050 | 5.000 | 5 | 500 - 3.000 | 3.000 - 12.000 | 8 | 2.350 |
| HM2-12-080 | 8.000 | 5 | 500 - 3.000 | 3.000 - 12.000 | 8 | 2.500 |
| HM2-12-100 | 10.000 | 5 | 500 - 3000 | 3.000 - 12.000 | 8 | 2.650 |
| HM2-12-120 | 12.000 | 5 | 500 - 3.000 | 3.000 - 12.000 | 8 | 2.800 |
| HM2-12-150 | 15.000 | 5 | 500 - 3.000 | 3.000 - 12.000 | 8 | 2.950 |
| HM2-12-200 | 20.000 | 8 | 500 - 3.200 | 3.000 - 12.000 | 12 | 3.350 |
| HM2-12-240 | 24.000 | 5 | 500 - 3.200 | 3.000 - 12.000 | 12 | 3.550 |
| HM2-16-090 | 9.000 | 5 | 500 - 3.500 | 3.000 - 16.000 | 12 | 3.300 |
| HM2-16-120 | 12.000 | 5 | 500 - 3.500 | 3.000 - 16.000 | 12 | 3.400 |
| HM2-16-160 | 16.000 | 5 | 500 - 3.500 | 3.000 - 16.000 | 12 | 3.600 |
| HM2-16-200 | 20.000 | 5 | 500 - 3.500 | 3.000 - 16.000 | 12 | 3.800 |
| HM2-16-240 | 24.000 | 5 | 500 - 3.500 | 3.000 - 16.000 | 12 | 4.000 |